Fuel Chief: Gas Caddy - Steel
25-Gallon Steel FM Approved Gas Caddy w/Heavy Duty Pump
Part No. JDI-25GC
- 25-Gallon Steel Tank.
- Makes fuel transfer safe and easy.
- FM Approved
- Complies with OSHA guidelines - FM approved
- Heavy duty FM Approved cast iron pump with carbon vanes
- Pump -- two-way operation for either siphoning or dispensing
- Pump -- 1 gallon for every 12 revolutions
- Fill level gauge.
- Ground wire and clamp.
- Fire-screened vent and filler neck combination.
- Dolly handle for ease of moving
- Decal Set for contents identification
- Weight 88 lbs.
Click here to download the Safe Fuel Handling Guide PDF
Pro 30-Gallon Gas Caddy w/ Air Motor - E85 Approved
Part No. FC-P30-A
- 30-gallon steel tank, bright red, durable, chemical-resistant epoxy powder-coat finish
- Air motor uses quick-connect air supply
- Unleaded, kerosene, ethanol E85, diesel, and bio-diesel fuels
- Gas caddy and air motor Factory Mutual (FM) Approved, complies with OSHA guidelines
- 10" heavy-duty rear wheels and 5" locking front casters
- Integral filter system to filter pumped fluid in and out of the tank
- Filter elements available in 1, 10, and 30 micron
- Air Motor/Pump Approximate Flow: 7gpm @ 60 psi
- 14 Gauge Steel Tank
Pro 30-Gallon Gas Caddy - E85 Approved
Part No. FC-P30
- 30-gallon steel tank, bright red, durable, chemical-resistant
- FM Approved, complies with OSHA guidelines
- Cast iron rotary pump with steel rotor and carbon vanes provides years of trouble-free service
- 4-way directional valve to easily control flow direction
- Integral filter system to filter pumped fluid in and out of the tank
- Replacement elements available in 1, 10, and 30 micron
- Unleaded, kerosene, ethanol E85, diesel, and bio-diesel fuels
- 14 Gauge Steel Tank
Pro Series 25-Gallon FM Approved Steel Gas Caddy
Part No. JDI-25GC-E85
- 25-gallon tank
- FM Approved
- Complies with OSHA Guidelines
- E85 Approved
- For use with unleaded gasoline, kerosene, ethanol E85, diesel, and bio-diesel fuels
- Complies with all OSHA requirements
- Compacted design allows for easy maneuverability
- Heavy-duty FM Approved cast iron pump with carbon vanes
- Pump -- two-way operation for either siphoning or dispensing
- Pump -- 1 gallon every 12 revolutions
- Fuel level gauge with stainless steel float and rods
- Nickel plated fittings on all hose connections
- Integral filter system to filter pumped fluid in and out of the tank
- Replacement filter elements available in 1, 10, and 30 micron integral filter system
- 8' PVC hose with integral steel grounding wire
Optional Air Motor Kit for FC-P30
Part No. FC-P30-P
- FM Approved Air Motor for FC-P30
- Modular shelf design that quickly install inside front panel
- Ergonomically positioned throttle control with variable speed capabilities
- Quick-connect air supply
- Variable speed air motor
- Bronze pedestal pump with viton seals
- Bronze gears with carbon bearings
- Air Motor/Pump Approximate Flow: 7gpm @ 60psi