 |
|||||
 |
 |
 |
 |
 |
 |
EuroVent Products
Finding and using the right tailpipe adapter to fit the variety of cars and light trucks that pull into your service bays can be difficult. With dual exhaust systems and recessed and flush mount tailpipes it can be virtually impossible. Even if the correct adapters is available, connecting and disconnecting from the exhaust hose can be difficult and time consuming.
Universal Tailpipe Adapter
Part No. QCN-2040
- Dia A: 4"
- Dia B: 6"
- Type: Rubber
Universal Tailpipe Adapter
Part No. QCN-2041S
- Dia A: 4"
- Dia B: 8"
- Type: Silicone
Universal Tailpipe Adapter
Part No. QCN-6782S
- Dia A: 4"
- Dia B: 6"
- Type: Silicone
Universal Tailpipe Adapter
Part No. QCN-2041
- Dia A: 4"
- Dia B: 8"
- Type: Rubber
QuickLink™ Organizer Rack
Part No. QCR-1452
- Rack allows for easy storage and access for up to 8 QuickLink™ Universal Tailpipe Adapters and 1 Y-Assembly
- Rack measures 14" wide x 52" tall, assembled
- Rack can easily be mounted to any wall, support beam, column or post
4 in. Y-Hose Assembly
Part No. QCY-4
- Designed for dual exhaust systems - the QCY-4 uses the same QuickLink connectors used on the tailpipe adapters
- Makes using a Y-Hose setup simple
4 in. Receiver with Damper Control
Part No. QCD-4D
- Fits 4" exhaust hose and is designed to accept all 4" QuickLink™ Tailpipe Adapters
- Damper control restricts air flow to prevent excessive air loss when not in use
Portable Tailpipe Adapter Stand
Part No. QCS-2041
- For use with recessed, flush mount or hard-to-reach tailpipe designs
- The stand is equipped with a QCN-2041 Tailpipe Adapter and is adjustable for both height and angle
- Place the stand in front and as close to the tailpipe as possible
- Attach the exhaust hose or Y-Assembly
- Adjust height and angle as required
